Cyclone dust collector is composed of inlet pipe, exhaust pipe, cylinder body, cone body and ash bucket. Cyclone dust remover is simple in structure, easy to manufacture, install and maintain and manage, low in equipment investment and operation cost. It has been widely used to separate solid and liquid particles from airflow or solid particles from liquids. Under normal operating conditions, the centrifugal force acting on particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. In the mechanical dust collector, the cyclone dust collector is the most efficient one. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove more than 5 m particles, parallel multi-pipe cyclone device for 3 m particles also have 80-85% dust removal efficiency. The pressure loss control range of cyclone dust collector is 500 ~ 2000Pa. Therefore, it belongs to the medium effect dust collector, and can be used for the purification of high temperature flue gas, is a dust collector widely used in boiler flue gas dust, multi-stage dust removal and pre-dust removal. Its main disadvantage is the low removal efficiency of fine particles (<5 m).

　　I. Working Principle:

　　Ordinary cyclone dust airflow from the inlet pipe from the tangent direction into the dust collector, on the inner wall of the filter of the shell and spiral vortex formed between the outer wall of the exhaust pipe, rotation of the down, under the action of centrifugal force, the dust particles reach the shell inner wall and the spiral flow and gravity, along the wall into the hopper, after purification of exhaust pipe.

　　Applicable industries:

　　Wood, Food, feed, leather, Chemical, rubber, plastic, grinding, casting, boiler, incinerator, kiln,

　　Asphalt mixing, cement, surface treatment, electronics, semiconductor, etc. Used for separation and pretreatment of coarse particle dust or fine powder.

　　Such as: saws, sanding grinding powder; Cloth chips, wood chips, copper wire ends, etc.